System M, this self-closing pivot hinge allows you to finetune the movement of your door, while easily carrying a broad of pivot door types up to 209 kg. It’s often used for interior doors without latching bolts and Light to medium weight doors.
We need to know about your door dimension for calculation.
Unlimited
400 – 4400 mm
Min. 40 mm
20 – 209 kg.
Let’s see this solution. SYSTEM M is suitable for Side Placement.
There are 2 functions. Select one that suitable for your door!
• Rotation 90°
• Hold position 90° and 0°
• Self-closing from 125° to 0°
• Rotation 180°
• Hold position 90°, -90°, and 0°
• Self-closing from 125° and -125° to 0°
Hydraulic backcheck (opening damping) for wall-protection, and soft-close.
Let’s learn about parts in our SYSTEM M before designing your door.
1. Ceiling plate
2. Top pivot
3. Bottom Pivot (System M)
4. Square floor plate or Round floor plate
** Ceiling plate and floor plate in stainless steel (Series 420) or PVD black. Including mounting set.
Let’s see figure out your SYSTEM M+ pivot which is suitable for your door!
To ensure the pivot hinge provides the appropriate movement for your door, System M+ is available in seven models and System M in four models suited to the weight and width of the door. There are no limits to the height of the door.
System M+ is suitable for pivot doors covering a range between 20 and 500 kg and is suitable for single- and double-acting doors. When combined with the door frames, the Latch Control ensures the door closes properly.
System M is suitable for pivot doors covering a range between 20 and 210 kg.
Specifications door: Width 1600 mm, height 3200 mm, weight 165 kg. The distance between the pivot point of the hinge and the side of the door is 91 mm.
1. Determine the distance of pivot point to the latch side of the door:
C minus B = A: 1509 mm
2. Check the door width
C = 1600 mm
3. Fill in the weight
KG = 165 kg
The following system suits this door:
M32(+) SCD
Material = Stainless Steel | Anodized aluminum
Corrosion resistance = EN 1670 – class 5 (norm:0-5)
Pivot Point 40 mm
Minimally present in open position
(** Use For Side Placement only **)
Pivot Point 70-200 mm
Suitable for almost every pivot door
(** Use For Middle Placement only **)
Pivot Point 91-200 mm
Easily lead cables through the top pivot
(** Use For Middle Placement only **)
Pivot Point 131-200 mm
Good for narrow aluminium frame
(** Use For Middle Placement only **)
Maximum Clear Width
Standard Type
Cable Grommet Type
Top Pivot Reversed Type
Ceiling plate Class B = 10 mm pin
Ceiling plate Class G = 15 mm pin
Receiver
FOR TOP PIVOT REVERSED
When ordering the top pivot Reversed, a rectangular Receiver is included in the set. The Receiveris mounted inside top of the pivot door. The pin of the top pivot Reversed is rotated downwards into the Receiver during the installation.
Ceiling Plate Class B
Ceiling Plate Class G
Ceiling Plate Receiver
If you have any question or ready to order us, Please press the button below here!
