SYSTEM FX is the ultimate system for high-traffic areas where the door mostly needs to remain open in a single hold position, while easily carrying a broad of pivot door types up to 209 kg. It’s often used for interior doors.
We need to know about your door dimension for calculation.
Unlimited
Unlimited
Min. 40 mm
20 – 209 kg.
Let’s see this solution. SYSTEM FX is suitable for Side Placement.
There are 2 functions. Which is your door opening?
Single-acting means that the pivot door can only be opened towards a single side. This is enforced by an external stop such as the door frame.
Double-acting means that the pivot door can be opened towards both sides, with a hold position at 90° at either side.
Revolving means that the pivot door can rotate a full 360°, with hold positions at 0° , 90° , 180° , and 270°.
Let’s learn about parts in our SYSTEM FX before designing your door.
1. Ceiling plate
2. Top pivot
3. Bottom Pivot (SYSTEM FX)
4. Square floor plate or Round floor plate
** Ceiling plate and floor plate in stainless steel (Series 420) or PVD black. Including mounting set.
Let’s see figure out your SYSTEM FX pivot which is suitable for your door!
SYSTEM FX is pretty self-explanatory, but it has some things you need to take into account. For instance, how to handle it correctly. To open or close, you guide the door manually until it reaches its hold position.
SYSTEM FX is suitable for pivot doors covering a range between 20 and 209 kg.
Specifications door: Width 1600 mm, height 3200 mm, weight 165 kg. The distance between the pivot point of the hinge and the side of the door is 91 mm.
1. Determine the distance of pivot point to the latch side of the door:
C minus B = A: 1509 mm
2. Check the door width
C = 1600 mm
3. Fill in the weight
KG = 165 kg
The following system suits this door:
System FX Class C
Material = Stainless Steel | Anodized aluminum
Corrosion resistance = EN 1670 – class 5 (norm:0-5)
Pivot Point 40 mm
Minimally present in open position
(** Use For Side Placement only **)
Pivot Point 70-200 mm
Suitable for almost every pivot door
(** Use For Middle Placement only **)
Pivot Point 91-200 mm
Easily lead cables through the top pivot
(** Use For Middle Placement only **)
Pivot Point 131-200 mm
Good for narrow aluminium frame
(** Use For Middle Placement only **)
Maximum Clear Width
Standard Type
Cable Grommet Type
Top Pivot Reversed Type
Ceiling plate Class B = 10 mm pin
Ceiling plate Class G = 15 mm pin
Receiver
FOR TOP PIVOT REVERSED
When ordering the top pivot Reversed, a rectangular Receiver is included in the set. The Receiveris mounted inside top of the pivot door. The pin of the top pivot Reversed is rotated downwards into the Receiver during the installation.
Ceiling Plate Class B
Ceiling Plate Class G
Ceiling Plate Receiver
If you have any question or ready to order us, Please press the button below here!
