SYSTEM 3 is a 360° rotating pivot system with various hold positions, ideal for pivoting walls. carrying a broad of pivot door types up to 40-350 kg.
We need to know about your door dimension for calculation.
Unlimited
1000 mm – 3800 mm
Min. 40 mm
40 – 350 kg.
Let’s see this solution. SYSTEM 3 is suitable for Side Placement.
ㆍRotation 360°
ㆍHold positions 0°, 90°, 180°, 270°
360° free-swinging pivot
Let’s learn about parts in our SYSTEM 3 before designing your door.
1. Ceiling plate
2. Top pivot
3. Bottom Pivot (SYSTEM 3)
4. Square floor plate or Round floor plate
** Ceiling plate and floor plate in stainless steel (Series 420) or PVD black. Including mounting set.
Let’s see figure out your SYSTEM ONE pivot which is suitable for your door!
360° rotation
System 3 offers rotation all around, while maintaining features like self-closure and hold positions.
Assisted closure and hold positions
From every 45° angle, System 3 rotates automatically towards its hold positions at 0°, 90°, 180° or 270°.
Pivoting walls
360° rotation combined with hold positions and self-closure are ideal features for pivoting walls.
SYSTEM 3 is suitable for pivot doors covering a range between 40 and 350 kg.
Material = Stainless Steel | Anodized aluminum
Corrosion resistance = EN 1670 – class 5 (norm:0-5)
Pivot Point 70-200 mm
Suitable for almost every pivot door
(** Use For Middle Placement only **)
Pivot Point 131-200 mm
Good for narrow aluminium frame
(** Use For Middle Placement only **)
Standard Type
Top Pivot Reversed Type
Ceiling plate Class B = 10 mm pin
Ceiling plate Class G = 15 mm pin
Receiver
FOR TOP PIVOT REVERSED
When ordering the top pivot Reversed, a rectangular Receiver is included in the set. The Receiveris mounted inside top of the pivot door. The pin of the top pivot Reversed is rotated downwards into the Receiver during the installation.
Ceiling Plate Class B
Ceiling Plate Class G
Ceiling Plate Receiver
If you have any question or ready to order us, Please press the button below here!
