- For upward-opening flap doors.
- Built-in damper causes flap to close gently preventing slamming.
- Built-in catch holds flap in fully opened position position.
- Can also be used with concealed, piano, or butt hinges.
- Depending on installation position, opening angle can be set to 80˚, 90° or 100˚.
- Two stop version also available (adds another stop at either 60°, 65°or 70° depending on installation position)
- Successfully passed 30,000 open/
close cycles in a private test.
- Closing speed adjustable.
- With 1 stay
Torque = 1.96 – 6.86 N.m (20-70 kgf.cm)
- With 2 stays, the torque will be doubled.
- Mounting plate NSDX-SZ (below)
- Mounting plate NSDX-CZ
- Mounting plate NSDX-AZ for 20 mm aluminium frame
- Mounting plate NSDX-GZ for glass door
- SDS-50G for glass door
INSTALLATION (OPENING ANGLE 90°)